| Previous | Contents | Index |
You are asked for the internet network mask.
Internet network mask for NSA101 (nnn.nnn.nnn.nnn)? 255.255.255.0_______ |
A default is provided for you.
You can press the [Return] key to accept the default or enter an internet network mask. If you elect to enter a different mask, it must consist of four segments separated by dots, and each segment must consist of a number between 0 and 255.
You are asked for the broadcast mask.
Broadcast mask for NSA101 (nnn.nnn.nnn.nnn)? 213.126.219.255_____ |
A default is provided for you.
You can press the [Return] key to accept the default or enter a broadcast mask. If you elect to enter a different mask, it must consist of four segments separated by dots, and each segment must consist of a number between 0 and 255.
You are asked for the default gateway host address.
Default gateway host address (nnn.nnn.nnn.nnn)? ____________________ |
This address should be the address assigned to you by your internet provider and given to the router device which is the gateway the CPU uses to get to the internet.
The address must consist of four segments separated by dots, and each segment must consist of a number between 0 and 255. For example:
Default gateway host address (nnn.nnn.nnn.nnn)? 213.126.219.250_____ |
You are asked for the internet domain name. This is your own internet domain name. For example, "TTINET.COM" is Touch Technologies, Inc.'s domain name.
Internet domain? ____________________ |
Enter the internet domain name. For example:
Internet domain? TTINET.COM__________ |
You are asked for the domain name server (DNS) address.
Domain name server address (nnn.nnn.nnn.nnn)? ____________________ |
This is the address of your internet provider. The address must consist of four segments separated by dots, and each segment must consist of a number between 0 and 255. For example:
Domain name server address (nnn.nnn.nnn.nnn)? 123.217.69.132______ |
You are asked whether you want to enable or disable the FTP client service.
+----FTP-----+
| Enable |
| Disable |
+------------+
|
Select Enable or Disable.
You are asked whether you want to enable or disable the SMTP client service.
+----SMTP----+
| Enable |
| Disable |
+------------+
|
Select Enable or Disable.
You are asked whether you want to enable or disable the TELNET client service.
+---TELNET---+
| Enable |
| Disable |
+------------+
|
Select Enable or Disable.
You are asked if you want to proceed with the TCP/IP configuration or not.
INTOUCH INSA Configure TCP/IP 10-Jan-1997
Interfaces
Unqualified host name: NSA101
Internet address : 213.126.219.38
Internet network mask: 255.255.255.0
Broadcast mask : 213.126.219.255
Routing
Default gateway host : 213.126.219.250
Domain
Internet domain : TTINET.COM
Domain Name Server
DNS address : 123.217.69.132
Client Services
FTP : Enable
SMTP : Enable
TELNET : Enable
+Proceed with TCP/IP configuration+
| Yes |
| No |
|---------------------------------|
| Exit |
+---------------------------------+
|
| Select Yes to proceed with the TCP/IP configuration. | |
| Select No to return to the TELNET client service enable/disable prompt. | |
| Select Exit to abort this procedure. |
If Yes, the message "Configuring TCP/IP services..." is displayed and the configuration is started. The message "TCP/IP configuration finished" tells that the configuration completed.
After the configuration is completed, you are asked if you want to start TCP/IP.
INTOUCH INSA Configure TCP/IP 10-Jan-1997
Interfaces
Unqualified host name: NSA101
Internet address : 213.126.219.38
Internet network mask: 255.255.255.0
Broadcast mask : 213.126.219.255
Routing
Default gateway host : 213.126.219.250
Domain
Internet domain : TTINET.COM
Domain Name Server
DNS address : 123.217.69.132
Client Services
FTP : Enable
SMTP : Enable
TELNET : Enable
+--------------------------------+ TCP/IP configuration finished
| W A R N I N G |
| | +Start TCP/IP+
| Starting TCP/IP requires that | | Yes |
| INTOUCH INSA be shut down. | | No |
| Are you sure you want to start | |------------|
| TCP/IP at this time? | | Exit |
+--------------------------------+ +------------+
|
If you select Yes to start TCP/IP, INTOUCH INSA will be shut down and then restarted. |
| Select Yes to start TCP/IP. | |
| Select No or Exit to return to the Configure menu. |
If Yes, INTOUCH INSA is shut down, TCP/IP is started, INTOUCH INSA is restarted, and the INSA Manager menu is displayed.
12.1.2.2 Enable/Disable TCP/IP Client Services
+-------------Configure-------------+ | Configure TCP/IP addressing | | Enable/Disable TCP/IP services | | Start up TCP/IP services | | Shut down TCP/IP services | |-----------------------------------| | Exit | +-----------------------------------+ |
If you select Enable/Disable TCP/IP services, the current TCP/IP status is checked.
INTOUCH INSA Configure TCP/IP 10-Jan-1997
+------------------------+
| TCP/IP Client Services |
| |
| FTP |
| SMTP |
| TELNET |
+------------------------+
Checking TCP/IP status...
|
If TCP/IP is running, you are asked if you want to enable/disable the client services. The current status for each of the services is displayed.
+------------------------+
| TCP/IP Client Services |
| |
| FTP Enabled | +----FTP-----+
| SMTP Disabled | | Enable |
| TELNET Enabled | | Disable |
+------------------------+ +------------+
|
You are asked if you want to enable/disable the FTP service. You can change the current status or leave it as it is.
The current status is the default option. Select Enable or Disable.
+------------------------+
| TCP/IP Client Services |
| |
| FTP Enable |
| SMTP Disabled | +----SMTP----+
| TELNET Enabled | | Enable |
+------------------------+ | Disable |
+------------+
|
You are asked if you want to enable/disable the SMTP service. You can change the current status or leave it as it is.
The current status is the default option. Select Enable or Disable.
+------------------------+
| TCP/IP Client Services |
| |
| FTP Enable |
| SMTP Disable |
| TELNET Enabled | +---TELNET---+
+------------------------+ | Enable |
| Disable |
+------------+
|
You are asked if you want to enable/disable the TELNET service. You can change the current status or leave it as it is.
The current status is the default option. Select Enable or Disable.
After the changes have been made, you are asked if you want to proceed.
+------------------------+
| TCP/IP Client Services |
| |
| FTP Enable |
| SMTP Enable |
| TELNET Enable |
+------------------------+
+-Proceed-+
| Yes |
| No |
|---------|
| Exit |
+---------+
|
| Select Yes to make the service changes. | |
| Select No to return to the TELNET client service enable/disable prompt. | |
| Select Exit to abort this procedure and return to the Configure menu. |
If Yes is selected, the client services changes are made. After you press [Return], you are returned to the Configure menu.
12.1.2.3 Start Up TCP/IP Services
+-------------Configure-------------+ | Configure TCP/IP addressing | | Enable/Disable TCP/IP services | | Start up TCP/IP services | | Shut down TCP/IP services | |-----------------------------------| | Exit | +-----------------------------------+ |
If you select Start up TCP/IP services, the current TCP/IP status is checked. If the services are currently running, the message "TCP/IP is already started" is displayed. If the TCP/IP services are NOT running, you are asked if you are sure you want to perform the start up procedure:
+Sure start up TCP/IP services+
| Yes |
| No |
+-----------------------------+
|
Select No to abort the TCP/IP services start up procedure.
Select Yes to start up the TCP/IP services. If Yes is selected, the services are started up. For example:
Beginning startup...
%RUN-S-PROC_ID, identification of created process is 2120032F
The Internet driver and ACP were successfully loaded.
%UCX-I-SETLOCAL, Setting domain and/or local host
%UCX-I-STARTCOMM, Starting communication
%UCX-I-DEFINTE, Defining interfaces
%UCX-I-SETPROTP, Setting protocol parameters
%UCX-I-ENABSERV, Enabling services
%UCX-E-CONFIGERROR, Error processing CONFIGURATION request
-RMS-E-RNF, record not found
%UCX-I-STARTNAME, Starting name_service
%UCX-I-LOADSERV, Loading UCX Server proxy information
%UCX-I-SERVLOADED, UCX Aux. Server loaded with 0 proxy records
-UCX-I-SERVSKIP, Skipped 0 communication proxy records
-UCX-I-SERVTOTAL, Total of 0 proxy records read
Press the RETURN key to continue
|
12.1.2.4 Shut Down TCP/IP Services
+-------------Configure-------------+ | Configure TCP/IP addressing | | Enable/Disable TCP/IP services | | Start up TCP/IP services | | Shut down TCP/IP services | |-----------------------------------| | Exit | +-----------------------------------+ |
If you select Shut down TCP/IP services, the current TCP/IP status is checked. If the services are currently shut down, the message "TCP/IP is already shut down" is displayed. If the TCP/IP services are running, you are asked if you are sure you want to perform this shut down procedure:
+Sure shut down TCP/IP services+
| Yes |
| No |
+------------------------------+
|
Select No to abort the TCP/IP services shut down procedure.
Select Yes to shut down the TCP/IP services. If Yes is selected, the servers that are running are shut down. For example:
UCX$NTPD server stopped
UCX$METRIC server stopped
UCX$FTPD server stopped
Press the RETURN key to continue
|
12.2 Control INTOUCH INSA Options
When the Control INTOUCH INSA option is selected, a
menu of control procedures is displayed.
+--------Advanced---------+
| Configure [>|
| Control INTOUCH INSA [>|
+---Control INTOUCH INSA----+Software Upgrade |
| Shut down INTOUCH INSA |System [>|
| Restart INTOUCH INSA |-----------------------+
+---------------------------+
|
The Control INTOUCH INSA menu options are:
The Control INTOUCH INSA menu options should ONLY be run when directed to do so by Touch Technologies, Inc. Technical Support. |
+--------Advanced---------+
| Configure [>|
| Control INTOUCH INSA [>|
+---Control INTOUCH INSA----+Software Upgrade |
| Shut down INTOUCH INSA |System [>|
| Restart INTOUCH INSA |-----------------------+
+---------------------------+
|
When you select Shut down INTOUCH INSA from the Control INTOUCH INSA menu, the following screen is displayed:
INTOUCH INSA INTOUCH Network Security Agent Shutdown 18-Jan-1997
WARNING: This procedure will SHUT DOWN INTOUCH Network Security Agent
+Sure shut down INTOUCH INSA+
| Yes |
| No |
+---------------------------+
EXIT = Exit INTOUCH INSA \ = Back HELP = Help
|
If you select No, INTOUCH INSA is NOT shut down.
If you select Yes, INTOUCH INSA is shut down in an orderly manner. During the shut down, the screen displays shut down information.
INTOUCH NSA - Network Security Agent (V1.5) - NSA Shutdown
Copyright (c) 1996-1997 Touch Technologies, Inc.
Shutting down NSA_HANDLER...
Shutting down NSA_SCANNER...
Shutting down NSA_REALTIME...
Shutting down NSA_RESOLVER...
NSA shutdown completed
.
.
.
Press the RETURN key to continue
|
+--------Advanced---------+
| Configure [>|
| Control INTOUCH INSA [>|
+---Control INTOUCH INSA----+Software Upgrade |
| Shut down INTOUCH INSA |System [>|
| Restart INTOUCH INSA |-----------------------+
+---------------------------+
|
When you select Restart INTOUCH INSA from the Control INTOUCH INSA menu, the following screen is displayed:
INTOUCH INSA INTOUCH Network Security Agent Restart 18-Jan-1997 +Sure restart INTOUCH INSA+ | Yes | | No | +-------------------------+ EXIT = Exit INTOUCH INSA \ = Back HELP = Help |
If you select No, INTOUCH INSA is NOT restarted.
If you select Yes, INTOUCH INSA is restarted. During the restart, the screen displays start up information.
INTOUCH NSA - Network Security Agent (V1.5) - Startup
Copyright (c) 1996-1997 Touch Technologies, Inc.
NSA processes still running, shutting down the processes...
Shutting down NSA_HANDLER...
Shutting down NSA_SCANNER...
Shutting down NSA_REALTIME...
Shutting down NSA_RESOLVER...
NSA shutdown completed
Ethernet devices: 1
INTOUCH NSA started up under user NSA_MANAGER
Awaiting startup completion... 84
Synchronizing startup completion... 56
Startup completed
Press the RETURN key to continue
|
+--------Advanced---------+
| Configure [>|
| Control INTOUCH INSA [>|
| Software Upgrade |
| System [>|
+-------------------------+
|
The Software Upgrade menu option is used when you want to upgrade the INTOUCH INSA box with a new version of the INTOUCH INSA software. This procedure performs the software upgrade installation.
When you select Software Upgrade from the Advanced menu, the following screen is displayed:
INTOUCH INSA INTOUCH INSA Software Upgrade 23-Jan-1997
This procedure will upgrade your INTOUCH INSA software to
a new version.
This procedure will require that INTOUCH INSA be shut down
for approximately 10 minutes.
The system will be shut down and automatically reboot after
the upgrade procedure is complete.
Please make sure that the upgrade disk is installed in
your removable disk drive.
+Sure Upgrade INTOUCH INSA Software+
| Yes |
| No |
+----------------------------------+
EXIT = Exit INTOUCH INSA \ = Back HELP = Help
|
If you select No, the software upgrade is NOT done and you are returned to the Advanced menu.
If you select Yes, the INTOUCH INSA software upgrade procedure starts.
Before you run this procedure, be sure to install the upgrade disk in your removable disk drive. See Section 2.1, Connecting the External Disk Drive, for information on connecting the external disk drive which is used for INSA software upgrades. |
The following steps are performed during the software upgrade:
After the software upgrade procedure is completed, the INSA machine asks for the Username and Password. You need to log on to the INSA machine to start up INTOUCH INSA and the INSA Manager. You will see the new INTOUCH INSA version number displayed in the main menu heading.
+-----------------INTOUCH INSA - Network Security Agent Vn.n-------------------+ | Security Status Reports Maintenance General Advanced Exit | +------------------------------------------------------------------------------+ |
NOTE: Transport Agents will automatically reconnect once INTOUCH INSA is restarted on the INSA box.
| Previous | Next | Contents | Index |